AUS 13R & 13S

Spec Sheet
IES Files

Specifications & Features

Housing: Extruded Aluminum Housing with Flush Mounting Base, Flat Top, Sealed Driver Compartment. Listing & Ratings: ETL: Listed for Wet Locations, ANSI/UL 1598, 8750 IP66 Sealed LED Compartment. Finish: Textured Architectural Bronze or Black Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request.
Lens: Clear UV-Stabilized Polycarbonate or SoftLED LumaLens Opal UV-Stabilized Polycarbonate Vandal-Resistant Inner Lens to Seal LED Array.
Mounting Options: Mounting Kit with 8˝ Zinc-Plated Anchor Bolts, Included.
EasyLED LED: Aluminum Boards
Wattage: Array: 16.6w, System: 18.1w; (70w HID Equivalent) Array: 25w, System: 27.2w; (70w HID Equivalent)
Driver: Electronic Driver, 120-277V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 2kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps.
Controls: Fixtures Ordered with Factory-Installed Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers.
Warranty: 5-Year Warranty for -40°C to +50°C Environment.