8′ to 30′ Round Tapered Aluminum Direct Burial

Spec Sheet

Specifications & Features

• 8’ to 16’ mounting heights
• For single or multiple luminaire mounting
• Luminaires may be mounted on tenons, brackets or shaft may be drilled to manufacturer’s mounting specifications

Shaft:
Direct Embedment: Unless otherwise specified, the length of the embedded section of a 4”diameter is 3’, 5” and 6” shaft is 4’, and 7” and 8” shaft is 5’. A 1 1/2” diameter grometted wire inlet hole located 1’ 6” below grade is included. The embedded section of the standard is coated inside and outside with zinc-rich paint.
Ground Lug: The ground lug is a tab that is welded to the inside of the shaft, has a tapped 3/8” –16 hole to accommodate the ground connector, and is located opposite the hand hole or wire inlet hole.
Handholes: All standards include a peripherally reinforced flush covered handhole centered 18” above the bottom of the standard. The opening in the 5” and 6” diameter standard measures 3” x 5”. The opening in the 7”, 8” and 10” diameter standard measures 4” x 6”. An optional 4” x 8” opening is available for 8” and 10” diameter standards.
Anti-Rotation Device: Standard on all Direct Burial poles.
Finish: Super Durable Polyester TGIC Powder Coat

• Standard finishes: high gloss black, textured black, high gloss white, medium bronze, dark bronze, green, gray, silver metallic
• Premium finishes (adder): Verde patina, pewter patina, silver sparkle, semi-gloss or matte black, satin brushed
• Custom and Marine-grade finishes are available. All RAL colors are available to match (adder).