1800K CCT LED Stainless Steel Bollard
Spec Sheet
Specifications and Features:
Housing:
Formed 316L Stainless Steel Housing with Flush Mounting Base & Vandal-Resistant
Screws, Domed Top, Internal Ballast Tray for Easy Maintenance.
Listing & Ratings:
CSA: Listed for Wet Locations, ANSI/UL 1598, 8750
IP65 Sealed LED Compartment.
Style:
Specially Designed Cone Reflector or Internal Louvers
Lens:
Clear UV-Stabilized Polycarbonate Vandal-Resistant Lens or SoftLED LumaLens UVStabilized
Polycarbonate Opal Vandal-Resistant Lens
Mounting Options:
Mounting Kit with 8˝ Zinc-Plated Anchor Bolts, Included.
1800K CCT LED:
Aluminum Boards. Delivers 1800K CCT and can be successfully applied on projects
requiring a nominal CCT range of 1700K to 2200K CCT. See Page 4 for Spectral Chart.
Wattage:
Array: 15w, System: 16.5w; (35w SOX 1800K CCT LED)
Driver:
Electronic Driver, 120-277V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard
Internal Surge Protection 2kV. 0-10V Dimming Standard for a Dimming Range of 100%
to 10%; Dimming Source Current is 150 Microamps.
Controls:
Fixtures Ordered with Factory-Installed Motion Sensor Controls are Internally Wired for
Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface
of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory.
Fixtures are Tested with 1882 Lighting Controls and May Not Function Properly With
Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage
Dimmers.