1800K CCT LED Large Wall Light

Spec Sheet

Housing:
Die Cast Aluminum Housing and Front Frame, Integral Heat Sinking and Driver
Compartment. Photocell Adaptable. Nickel-Plated Stainless Steel Hardware.
Listing & Ratings:
CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP66 Sealed LED Compartment.
Finish:
Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating.
Custom Colors Available Upon Request.
Lens:
Tempered Clear Flat or SoftLED Flat Glass, or Tempered Clear Flat Prismatic Glass
Lens.
Mounting Options:
Mounts with Kitty Hawk Arm, Adjustable Slipfitter, 2⅜˝ Diameter Mounting Arm Adapter,
Yoke, Two-Piece Bracket or Wall Mount Bracket. (Factory Installed)
1800K CCT LED:
Aluminum Boards. Delivers 1800K CCT and can be successfully applied on projects
requiring a nominal CCT range of 1700K to 2200K CCT. See Page 4 for Spectral Chart.
Wattage:
76w: Array: 76w, System: 82w; (55w SOX 1800K CCT LED)
164w: Array: 163.8w, System: 176.4w; (135w SOX 1800K CCT LED)
Driver:
Electronic Driver, 120-277V, 50/60Hz or 347-480V, 50/60Hz; Less Than 20% THD
and PF>0.90. Standard Internal Surge Protection 6kV. 0-10V Dimming Standard for a
Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps.
Controls:
Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally
Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired
Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult
Factory. Fixtures are Tested with 1882 Lighting Controls and May Not Function Properly
With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage
Dimmers.