18′ to 30′ Round Tapered Direct Burial

Spec Sheet

Specifications & Features

•18’ to 30’ standard mounting heights
•For single or multiple luminaire mounting
•Luminaires may be mounted on tenons, brackets or shaft may be drilled to manufacturer’s mounting specifications

Shaft
The shaft is extruded from new seamless 6061 alloy aluminum tubing and heat treated to produce a T6 temper. All shafts are polished with fine grit aluminum oxide cloths, resulting in a high quality, circumferential satin brushed finish. After finishing, each shaft is wrapped for protection in shipment.
Direct Embedment
Unless otherwise specified, the length of the embedded section of a 4″ diameter is 3′, 5″ and 6″ shaft is 4′, and 7″ and 8″ shaft is 5′. A 1 ½” diameter grommet wire inlet hole located 1′ 6″ below grade is included. The embedded section of the standard is coated inside and outside with zincrich paint.
Ground Lug
The ground lug is a tab that is welded to the inside of the shaft, has a tapped ⅜” –16 hole to accommodate the ground connector, and is located opposite the hand hole or wire inlet hole.
Tenons
T300=Standard for post top (27/8” OD x 3” tall)
T355=Standard for shepherd’s crook arms (27/8” OD x 5.5” tall)
CAP=Removable cap, no tenon
Accessories
GFIC=Weatherproof GFI in-use cover, cast aluminum*
GFIP=Weatherproof GFI in-use cover, plastic*
USB=Dual USB Port*
HH=Handhole available as an option
ARD=Anti-Rotation Device available as an option
*Must indicate location (See Orientation Guide on last page)

Finish – Super Durable Polyester TGIC Powder Coat
• Standard finishes: high gloss black, textured black, high gloss white, medium bronze, dark bronze, green, gray, silver metallic
• Custom and Marine-grade finishes are available. All RAL colors are available to match (adder).
Warranty
5 year limited warranty